Jeep Wrangler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
568 Posts
Discussion Starter #1
a couple weeks back my daughters 02 4.0 5 speed started having an intermittent miss which soon turned into a full blown stalling and bucking. Code showed Cam sensor, replaced it drove 3-4 miles everything OK. Started stalling again after she warmed up good. It was showing it to be out of time so I had the oil pump drive replaced, while in the shop it threw more codes indicating bad coils, so they were replaced. My daughter picks it up from the Jeep dealer goes 10 -12 miles and it starts all over again. Replaced the crank sensor. driven 10-12 miles and stalls again.

It seems as all the known gremlins have been replaced. I'm leaning toward either a ECM issue or a bad set of cat's. I'm damn tired of replacing parts only to have another code show up. That's why I'm leaning towards the ECM.

Throw some knowledge my way fellas I'm already a grand into it an still no further along.

Thanks

Mud.
 

·
Registered
Joined
·
568 Posts
Discussion Starter #2
bump
 
1 - 3 of 3 Posts
Top