Jeep Wrangler Forum banner

Throwout bearing noise?

1552 Views 3 Replies 4 Participants Last post by  kjeeper10
2013 with 1K miles on it. With the radio and HVAC off, engine running, I can hear a very faint rumbling sound with the clutch pedal depressed. Is this normal or should there be no change in sound with the pedal depressed?
1 - 4 of 4 Posts
EricM said:
2013 with 1K miles on it. With the radio and HVAC off, engine running, I can hear a very faint rumbling sound with the clutch pedal depressed. Is this normal or should there be no change in sound with the pedal depressed?
My 2012 had throw out bearing noise when clutch was out, went away after they pulled the transmission and replaced it. Now there's a little rumbling sound when clutch pedal is out but goes away when pedal is depressed.

So mine is opposite yours! Ha
I notice some noise while in reverse...just kinda a bit of a rumbling. I can also kinda feel it. Not sure whether it's just a matter of backing outta the driveway and when I turn the wheel, I'm feeling the treads from the tires on the pavement or not...I guess it could be.

No problems with shifting or anything, so I guess it's normal...
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top