Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
So I'm putting a lift on my 06 wrangler rubicon and when I went to take off the 4 bolts to drop the torque shaft bracket the bolts just spun. So I climb under and the bushings are rusted to hell. Anyone know we're to get the bolts and bushings? The dealer sells bolts but not the bushings. I don't feel like buying the kit for $86 for a couple bushings.
 

·
Registered
Joined
·
998 Posts
Just changed out the factory bracket on my 98 tj to the Advanced Adapters transfer case bracket to get better alignment on the shift linkages. 715542 : Stand aloneJeep TJ transfer case shifter bracket | Advance Adapters
With my 4" lift the transfer case shifting is so much easier and smoother with this bracket. My bushing tore out on removal but doesn't matter since it isn't needed with the new kit and they even send plugs for the floor holes. Standard ship was only 3 or 4 days.
 
1 - 2 of 2 Posts
Top