Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
327 Posts
Discussion Starter · #1 ·
I have a TPMS sensor that will read 0 PSI then jump to 254 PSI. It never reads "--", it is always 0 or 254 PSI. Has anyone else encountered a similar issue? I am curious if the sensor has failed or I have another problem.

The issue started after I put a trailer on the Jeep. The trailer was probably a little heavy for the Jeep, but we were only moving it about 15 feet to fit into a tight spot. I am sure this is totally unrelated, but the issue started the next day after moving the trailer.
 

·
Registered
Joined
·
2,468 Posts
I've heard of this happening on Ram trucks. It's a symptom of a bad sensor.
 
1 - 2 of 2 Posts
Top