Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 3 of 3 Posts

·
Registered
Joined
·
400 Posts
Discussion Starter · #1 ·
I've got a 98 tj that needs the transfer case rebuilt. This is my first jeep and I was wondering if it was as simple as dropping the skid plate, then dropping the transfer case and so on. If somebody could help that'd be great!! Thanks in advance.
 

·
Registered
Joined
·
1 Posts
Drop the skid, drain the oil, loosen front output yoke nut while it's still on the jeep, disconnect the shifter rod and the speedo, remove the 6 nuts and you're golden.
 

·
Registered
Joined
·
400 Posts
Discussion Starter · #3 ·
Fork inserts were bad. Next question is to why is it when I try to put my jeep in 4lo, the linkages hit and won't let them go past the neutral in the transfer case?
 
1 - 3 of 3 Posts
Top