Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of Aug's Ride of the Month Challenge!
1 - 6 of 6 Posts

·
Registered
Joined
·
2,869 Posts
Discussion Starter · #1 ·
I thought you could program the Jeep to unlock all the doors with just 1 push on the keyfob. Can anyone steer me in the right direction? I did a search and I checked my operators manual.
 

·
Registered
Joined
·
292 Posts
Here you go. Page 25 of the OM. It can also be done with the EVIC.

1.Press and hold the LOCK button on a programmed RKE transmitter.

2.Continue to hold the RKE transmitter LOCK button for at least four seconds, but not longer than 10 seconds, then press and hold the RKE transmitter UNLOCK button.

3.Release both buttons at the same time.

4.Test this feature while outside of the vehicle by pressing the LOCK/UNLOCK button on the RKE transmitter.
 

·
Registered
Joined
·
2,869 Posts
Discussion Starter · #4 ·
Hey thanks for this, I don't have EVIC. someone once printed out a list of all the stuff you could change, was real handy and beat looking through the OM. I was looking around page 38 last night.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top