Jeep Wrangler Forum banner
1 - 5 of 5 Posts

·
Registered
06 TJ SE 2.4L 6spd, 79 CJ5 258ci 4spd, 83 CJ7 258ci auto
Joined
·
1,474 Posts
If thats the bumper, my concern would be the width vs the width of a YJ, otherwise a welder will most likely be needed for the modification ou'll need to do, probably more work than it's worth, best if you can fine a 4x4 shop with some choices in stock, so you can measure etc to get an idea how much work is actually involved. Maybe a YJ owner will chime in with one of these or offer some advice on a good substitute. Good luck!!
 

·
Registered
06 TJ SE 2.4L 6spd, 79 CJ5 258ci 4spd, 83 CJ7 258ci auto
Joined
·
1,474 Posts
JK frame
Automotive tire Motor vehicle Automotive exterior Automotive wheel system Gas


YJ frame
Chair Automotive tire Road surface Automotive exterior Luggage and bags


Probably get dimensions from the internet somewhere
 

·
Registered
06 TJ SE 2.4L 6spd, 79 CJ5 258ci 4spd, 83 CJ7 258ci auto
Joined
·
1,474 Posts
Might be able to modify your YJ frame to adapt to the bumper vs trying to modify the bumper, might be a lot easier.
Definitely start a thread on the job if you go this route
 

·
Registered
06 TJ SE 2.4L 6spd, 79 CJ5 258ci 4spd, 83 CJ7 258ci auto
Joined
·
1,474 Posts
This is helpful... sort of. If the dimensions of front frame are similar, I could possibly fab up some brackets. Thanks for this.

Speed
No problem, like I said, difinitely start a build thread on it
 
1 - 5 of 5 Posts
Top