Jeep Wrangler Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
97 Posts
Discussion Starter #1
I just ordered the Warn Stubby Rock Crawler Bumper for my 2013 JKU Sport.

WARN 87600 - WARN Rock Crawler Stubby Front Bumper with Grille Guard for 07-14 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec

While Quadratec and other sites state it is got models 07-14 the Warn website states for 07-12. I have seen where others have this installed on their 2013's and 2014's. My guess is Warn has not updated this info on their website as I don't think there would be any changes to the mounting points on the JK's from 2007-current models.

For those who have this bumper installed on their 2013 or 2014. Was there any issue with the installation?

thanks.
 

·
Registered
Joined
·
158 Posts
A friend at our last weekend event had a warn bumper that he said had horrible fitment issues. So if it does, no pun intended but be WARNed
 

·
Registered
Joined
·
97 Posts
Discussion Starter #5
Thank you for the responses. It's a mixed bag, from fitment issues, to pump relocation to fits just fine. Jeepers are installing this bumper on their 2013's and 14's obviously from what I have found. Plus Quadratec and other big aftermarket retailers list it for 2007-2014 jeeps. My jeep dealer service tech guy is checking with his guy who does their aftermarket parts install to get his input. I'm just not mechanically savvy enough to attempt this myself. Hopefully my Jeep service department will see no issue getting it installed as I haven't seen any other stubby bumper I Like.
 

·
Registered
Joined
·
3,428 Posts
There was no major change from 12 to 13 (or 14) that would affect the fitment of the bumper. You should have no trouble with it (barring a rare manufacturing defect).
 
1 - 6 of 6 Posts
Top