Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 3 of 3 Posts

·
Registered
Joined
·
268 Posts
Discussion Starter · #1 ·
Have any of you taken the new JK rubicon wheels and used adapters to fit them to your tj? I'm thinking about it. You can get a set of 5, with tires, in like new condition from craigslist for under a grand.

Know what spacer/adapter to use?

Thanks.
 

·
Registered
Joined
·
296 Posts
5x4.5 to 5x5. And they're going to be a tight fit, they're basically 32s stock.

I'm not a fan of spacers personally but many run them without issue. Make sure you torque them properly.
 

·
Super Moderator
Joined
·
6,897 Posts
theres a reason so many of them are taken off and sold for way too much money

IMHO, a 17" rim shouldnt be used on anything smaller than a 35" tire

the correct spacer would be one that adapts 5-4.5 to 5x5 preferably from a quality brand like spidertrax
 
1 - 3 of 3 Posts
Top