Jeep Wrangler Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
575 Posts
Discussion Starter #1
M looking at the 3/4" Daystar or Rubicon Express does anyone using either of them
 

·
Registered
Joined
·
844 Posts
I have the 3/4" Daystar in the front of our Jeep and it is good so far.

I went with Daystar because they have a good rep and have been making stuff like this for a long time. I could get a cheaper one on eBay but I was not interested in one that some Chinese guy made in his bathtub out of old tires.
 

·
Registered
Joined
·
191 Posts
I did 1.5" aluminum spacers on the front and .75" Daystars on the rear.

All spacers are the same. Just make sure you have .75" more on the front.
 

·
Registered
Joined
·
2,300 Posts
That would be almost 1" lost at full stuff, just a question, but the coil springs have to come out anyways to install a 3/4" spacer, why not go with longer coil springs ? with those Fox shocks, you may already have 3" bumpstops already.
 
1 - 6 of 6 Posts
Top