[wheelinman88]

hows it goin gang,

So i just barely got my jeep running after 4 months of sitting in the driveway due to a faulty cam. had to drop another $1000 into an engine that cost me $3300 to build 15k miles ago... stupid CompCams, but thats another story. I got to drive it for a wopping 9 days then my tranny went out. it was a 32RH. my question is, can i swap out the 32RH (3 speed auto) for an AW4 or any other automatic jeep transmission with no problems with the computer?. will the different tranny mess anything up?

 

[UnlimitedLJ04]

for the AW4, you'll have to replace the TCM with the correct one, including associated wiring, then cut open your ECM wiring harness to access the necessary inputs.

write-ups:
AW-4 Transmission Swap - 1
Scott Kruize - AW4 Swap

other Jeep trans will be a similar story, but more complicated....

 

[wheelinman88]

for the AW4, you'll have to replace the TCM with the correct one, including associated wiring, then cut open your ECM wiring harness to access the necessary inputs.

write-ups:
AW-4 Transmission Swap - 1
Scott Kruize - AW4 Swap

other Jeep trans will be a similar story, but more complicated....

Damn... i had a fealing it was going to be something like that. Well if thats the case i think i might just stick with rebuilding the tranny i have or finding one like it. i appreciate the feed back!