Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Have a rod knocking in my 99 wrangler. Xj moters are easy to find just wondering if they will work?
 

·
Registered
Joined
·
6 Posts
Short answer: Yes. Your '99 has a different intake manifold than older 4.0's, and you'll want to keep it. 2000 and newer XJ's went away from the distributor/wires setup to a coil on plug, but all you have to do is toss in a distributor and plug wires and you're good. '96-99 should be a direct swap though. Have fun swapping!!
 
1 - 2 of 2 Posts
Top