Jeep Wrangler Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Just wondering can a winch be mounted to a factory front bumper if so has anyone done it? Any pics and advice would be greatly appreciated
 

·
Registered
Joined
·
273 Posts
I bought my winch mount at Harbor Freight for $25. Had to cut the stock bumper and drill the frame. Put an ENGO 10k with synthetic line on.
 

Attachments

·
Grampie
Joined
·
783 Posts
Ex Umbris Currus said:
I bought my winch mount at Harbor Freight for $25. Had to cut the stock bumper and drill the frame. Put an ENGO 10k with synthetic line on.
There is a thread here somewhere where a guy mounted the Harbor Freight mount below the bumper & brought the cable out the middle of the bumper, between the fog lights. Looks cool, lots of work.
 

·
Registered
Joined
·
11 Posts
Discussion Starter #8
If you could find that post stan and link me to it that would be cool to try and recreate
 

·
Grampie
Joined
·
783 Posts
If you could find that post stan and link me to it that would be cool to try and recreate
I'm looking but can't find it yet. I did find that Smittybuilt also has a winch mount plate for a stock bumper, similar to the harbor freight one.
 
1 - 11 of 11 Posts
Top