[peter1997tj]

I have a 97 tj that is from the US and was the soft top option. I got the wiring from a 98. I have the hard top wired in fine I am just havin a problem as to were the wires for the switches connect to... I have the orange(illumination) and black(ground) connected but just wondering if there was a way to hard wire the switches to the hardtop wiring coming from the back?Thanks

 

[peter1997tj]

Need help plz

 

[Neil F.]

(A little lost.) You got the stock wiring I assue and not the Mopar add on kit? Yes there is a harness that runs to the rear with the connector for the top. It also includes the hose for the washer. I put in the Mopar kin in mine. This will tell you the pins on the plug. Hardtop wiring: converting plugs to match different years - JeepForum.com

 

[peter1997tj]

Yes the wiring is stock I have the wiring connected from the hard top to the 100 box( red connector) my problem is what can I connect the wiring to for the switches

 

[peter1997tj]

Anyone solve this problem before?