Jeep Wrangler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #1
I've been getting a weird wobble whenever I turn right, and especially when I'm traveling 40-45. It's weird because it doesn't happen when i turn left and as soon as I cut the wheel back the wobble stops. I had replaced the passenger side ball joint a few weeks ago. When this started happening I checked the drivers side ball joint and it was loose so today I replaced it and although the wobble has gotten smaller, its still there. Any ideas? I checked the track bar btw, because I had an issue with that before and it was tight. Also, I replaced the passenger side ujoint over the winter but the drivers side seems to be fine. Thanks.
 

·
Registered
Joined
·
126 Posts
check your from swaybar links the lower part where they connect with the t50 bolt, the nut might be coming loose. I think it should be your right side one (passenger) but check both just in case
 

·
Registered
Joined
·
90 Posts
Its probably your axle u-joints that need changing,I had the same problem only while turning left,nothing the other way or straight.The axle u-joint was so stiff I couldnt move it once removed(orange rust).Replaced both and no more wobble while turning.
 
1 - 3 of 3 Posts
Top