Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I replaced my 15x8 wheels with 15x10 on 35x12.5x15 tires. The 15x8 were mounted to 2" spacers and looked good. I put the new wheels and tires on the Jeep and retained the spacers. My tires are 4.5" outside my 6"wide fender flares now and my front rotors are outside the wheel now.

I does not look bad, but is this safe? Should I remove the spacers? Without them, I would still have 2.5" outside the flares and I think it would still look good.

Any advise would be appreciated. Thanks in advance!
 
1 - 2 of 2 Posts
Top