The Olympic, Mopar and Rugged Ridge light bars are all the same. I bought the Rugged Ridge version and have three KC Apollo Pro lights (6 inch,100watts) on mine.

 

Do you think there is enough room for 3 slightly bigger lights on it? And how do you measure your lights? Is it 6 inches in diameter? Or what? Thanks for the quick response!

 

The size of the lights should be the diameter( across the face).

 

So just the lense size? And do you think 3 bigger lights would fit on your bar?

 

The mounts are eight inches on center. With three six inch lights, there is two inches between each light. So, if your lights are 7, they would touch. If they are larger, they won't fit.

 

With three six inch lights, there is two inches between each light. So, if your lights are 7, they would touch. If they are larger, they won't fit.

So there is a total of 22inches of space?

 

when the mounts are installed on either side there will be 4"s if they were to be correctly and equally spaced

 

 

:iamhappy:

 

Only one way to find out. Put um on... if "you" dont like them... send them back.

 

Does anyone have a windshield mount preference? :worthy:

 

I have a pair of KC HiLites SlimLite 130W spots mounted on the KC brackets. I like the way they look. Nice and clean, easy install.

KC HiLiTES Light Mounting Bracket Black Pair - KCH-7316

 

I also have the KC windshield mount. Nice and solid.

There was a post a couple weeks ago of a guy using the KC brackets that mounted on the side off the windshield. They looked pretty good too.