You don't own a car. You do have a jeep/rig/wrangler/nickname though. And the harnesses should be dangling down or tape up somewhere...70ish% sure

 

awesome...thanks

 

No, the jeep will not have the wiring harness if it did not come with factory fogs. If yours was wired for fogs most likely you will still have a switch for them. If not, check out the kc Apollo pro kits, as they come with a full harness that is very easy to run. Here's a link to them https://www.quadratec.com/products/97048_3512.htm

 

No, the jeep will not have the wiring harness if it did not come with factory fogs.

Some that did not come equipped with the factory fog lighs do have the wiring harness to the bumper.

 

If equipped, it should be @ the very end of the blinker arm. The very end part should "Pull out & push in" (on/off)

 

If equipped, it should be @ the very end of the blinker arm. The very end part should "Pull out & push in" (on/off)

But it only works if the headlights are on...

 

On my rig the headlights do not need to be on, but the parking lights do.

 

Bought a 06 TJ X several years ago. Put fog lights on. I did find the harness along the inside edge of the fenders behind the turn signals. I bought a used multi-function light switch from Davey's Jeep, which is how you turn on the Fog lights if factory installed. Also had to purchase the fog light relay. Then I bought a new PIAA Fog light kit (they look so much better than stock) for my Jeep. A complete harness came in the kit, but I didn't use it. I also installed factory Cruise Control, 06 Sport wheel/tires and the premium sound system. A work in progress.

 

I installed KC daylighter 130 watt. Came with a harness. Super easy to install and I hate Electrical stuff. Very bright, I love em

 

i was thinking about just doing the kc 1133's in the factory spot, but i guess ill just wait until i get the car back from the dealer to order those! thanks guys

 

UPDATE!!

Just got the Jepp back from the dealership, New Rim, 2 new Tires, New radio, and a new belt and tensioner later! I just checked and i have the harness connectors under my blinker...but my headlight switch does not pull out or push in...if i install the fogs do I need to run a switch for them or will they work off my headlights?

thanks

(ps, i bought the rugged ridge lightbar kit with the bar 3 lights and the harness and switch...is it possible to run those fogs to this switch or no?

todd

 

It looks like those are 100w lights. IMO they might be too much for the stock wiring to handle.

 

You'll need the 03(I think)-06 MF switch, older jeeps had a dash mounted switch. Also need to ensure the relay is there. The owners manual will tell you where it should be.

 

yeah i opted to go with the kc kit...that comes with a new harness relay and switch...it was only 15.00 more expensive then the lights themselves thanks tho

 

I installed the multi-function switch for my 06X that had the wiring harness but did not have a switch. MANY on here recommended wiring a separate toggle switch but I preferred the column mounted multi-function switch. Don't forget the relay in the fuxe box in the engine compartment. Without adding the relay the fogs still won't work.

 

I'm installing fogs in my ace rear bump. I will use factory fogs and need a wire harness to hook them directly to the reverse lights. Anyone have a harness they're not using? Or know where I can get one without having to purchase the full kit with the light/blinker stem? They want $125 for the entire kit. Is this average pricing?