Feeling so dumb... I have replaced my upper control arms and axle bushings and, for some reason I don't know, may be the planets lined up in a scecific way, I have installed the axle bushing on the driver's side the other way round. Fron inside the axle.
On the picture below you can see the way it was installed previously, with the lip facing outside. Mine is facing with the lip inward.
![Image]()
Do I need to worry about that and do I need to install the bushing the correct way?
On the picture below you can see the way it was installed previously, with the lip facing outside. Mine is facing with the lip inward.
Do I need to worry about that and do I need to install the bushing the correct way?
