I've got an O2 sensor and the connector just hanging, and no where to connect it. Ive looked all over for the female end and don't have a clue as to where it goes. I was wonder if anybody could shoot me some pics of the O2 sensors near the exhaust manifold and where they are supposed to hook up? I have a feeling the previous owner may have cut off the plug. Why anyone would do that I don't have a clue.
gratone1
On the 2.5 the connector should be at the rear of the intake manifold. If you can locate the crankshaft position sensor wiring the connector should be in the same general area.
Here is a pic of the O2 Sensor its at the bast of the exhaust manifold. Not the sensor that is on the exhaust before the converter. Where does this bad boy attach to? If someone can some pics so I can see if someone cut the female connection that would be great.
Attachments
I just looked and I saw a lot of the plugs in the pic. Judging by the location of the O2 sensor it looks like it goes there in that area. Just no female plug for it. If it's missing what exactly are my options?
Ok so the first pic is the cable that hanging attached to the manifold. The second is the wiring harness. There is 4 lines coming out of it. I looked and nothing is cut. I'm really at loss here guys/gals
Attachments
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
